Specification
| Model No | GY3615WXD60/220AC, GY6515WXD120/220AC, GY10115WXD180/220AC,GY6530WXD240/220AC |
| Light Source | LED |
| light source components Quantity | 1,2,3,4 |
| Power | 60W ,120W ,180W 240W |
| Input | AC220V/50HZ |
| Power factor | ≥0.95 |
| Lamp Luminous Efficiency | ≥130lm/W |
| CCT | 3000K～5700K |
| Color Rendering Index(Ra) | Ra70 |
| IP Rating | IP66 |
| Electrical safety level | CLASS I |
| Working temperature | -40～50℃ |
| surface treatment | Antiseptic spray+ Anodizing |
| Dimension | 429*150*122mm, 719*150*122mm,
1081*150*122mm, 714*300*223mm |
| Net weight | 2.9kg,4.3kg,5.8kg ,8kg |
| Carton size | 470*200*230mm, 760*200*115mm, 1120*200*115mm, 760*380*115mm |
| Amount per box | 2 ,1 |
Feature
1) Appearance design: The lamp is a long strip with a simple appearance and smooth lines.
2) Heat dissipation design: The heat sink with high thermal conductivity can effectively reduce the temperature of the chip and ensure the long service life of the light source.
3) Optical design: light distribution design is carried out for overhead ceiling installation and tunnel installation, so that the light on the road is uniform
Soft, effectively reduce glare and improve light utilization, providing a comfortable lighting environment.
4) Control interface: The lamps can reserve control interfaces such as 0-10V, which can realize the dimming control of lamps.
5) Installation method: The two ends of the lamp are installed by brackets, and the 4 fixing holes at both ends are fixed on the installation surface.
6) Angle adjustment: After the lamp bracket is fixed, the installation angle of the lamp can be adjusted within the range of ±90°, with adjustment
The scale indication ensures the uniformity of the angle when the lamps are installed in batches.
7) Anti-falling design: The lamps are designed with anti-falling chains to ensure the safe and reliable use of lamps in special circumstances.
8) Protection level: The protection level of the lamp is IP66, which meets the requirements of outdoor use environment.
9) Green environmental protection: It does not contain harmful elements such as mercury and lead.
Dimension
Structure and material
| serial number | Name | Material | Remark |
| 1 | Bracket | Steel | |
| 2 | Lens light source assembly | ||
| 3 | Backplane | Steel | |
| 4 | Lamp body | Aluminum
|
|
| 5 | Driver | inside the lamp body
|
|
| 6 | End plate
|
Steel | |
| 7 | Angle adjustment dial
|
Aluminum
|
Light distribution scheme
Installation method
Unpacking: Open the packing box, take out the lamps, check whether the lamps are in good condition and whether the accessories are complete.
Drilling fixing holes: According to the size of the fixing hole of the lamp bracket of the product size chart, punch the fixing hole at the appropriate position on the installation surface.
Fixture of lamps: Use bolts or expansion bolts to fix the lamps on the installation surface through the fixing holes of the lamp bracket.
Use bolts to fix the light chain in a specific position.
Fixing the light fixture makes attention to the direction of the light fixture.
Lamp installation angle adjustment: Loosen the angle adjustment screw, adjust the installation angle of the lamp as required, and then tighten the angle adjustment screw again to complete the adjustment of the lamp angle.
Electrical connection: Distinguish the polarity, connect the power supply input lead of the luminaire to the mains, and do a good job of protection.
brown – L
blue – N
green-yellow – ground
Note: The entire installation process needs to be carried out in the case of power failure, and the power supply can be supplied after all installations are completed and checked.
Application
It is suitable for the installation of road lighting under the ceiling in the city, and the fixed lighting in the tunnel.
Post time: Oct-21-2022